<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="19">
<package pkgid="3fea63e5cc57399c85a407e8cad4578e2fdf94a246bcc691bb820f3c07b5c9d0" name="SuSEfirewall2-snat" arch="noarch">
  <version epoch="0" ver="1.5" rel="6.1"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="1675c3166478f1bdabd2fd6a8e40e83d813d8a89fefc7ff62da09b431f76fa21" name="SuSEfirewall2-snat" arch="src">
  <version epoch="0" ver="1.5" rel="6.1"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="7010146006216fada56f82a20fa88f4da92092048432ee6d511c98879190246f" name="bms-network-setup" arch="noarch">
  <version epoch="0" ver="1.11" rel="27.1"/>
  <changelog author="kurt@garloff.de" date="1534852800">- Change ordering of patch application to avoid conflict on RHEL7.</changelog>
  <changelog author="kurt@garloff.de" date="1534939200">- Fix in face of hotplugged NICs:
  * Wait for hotplugging to be completed.
  * Ifdown interfaces again that get enslaved.</changelog>
  <changelog author="kurt@garloff.de" date="1534939201">- Temporarily disable ifdowning interfaces.</changelog>
  <changelog author="kurt@garloff.de" date="1535025600">- Also disable hotplugging wait again, solve it in the hotplugging
  package instead.</changelog>
  <changelog author="kurt@garloff.de" date="1536753600">- Fix inconsistent indentation.</changelog>
  <changelog author="kurt@garloff.de" date="1536753601">- Fix SuSE detection for SLES15. (No /etc/SuSE-release!)</changelog>
  <changelog author="kurt@garloff.de" date="1539172800">- bms-setup-retry-findmac.diff: Retry when searching for NIC with
  our MAC address.</changelog>
  <changelog author="kurt@garloff.de" date="1539345600">- bms-network-setup-1.3:
  * Fix detection of perm_hwaddr for bond slaves on old kernels.
  * Fix parsing option -d.
  * New option -c to remove ifcfg-e* files for non-existing NICs.
    Use it on EulerOS.</changelog>
  <changelog author="kurt@garloff.de" date="1540296000">- bms-netplan-notab.diff: Remove erroneously introduced tabs from
  netplan yaml config again. (Sabrina).</changelog>
  <changelog author="kurt@garloff.de" date="1542369600">- bms-network-setup-1.4:
  * Fix syntax for transmit-hash-policy (from Sabrina Mueller).</changelog>
  <changelog author="kurt@garloff.de" date="1542974400">- Tune local disk for larger readahead (512-&gt;1280kB) on BMS.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1574769600">- Set network bond in netplanc configuration to 'active-backup'
  when getting mode: 1 from network_data.json
  netplan does not understand mode: 1 amymore in Ubuntu 18.04</changelog>
  <changelog author="kurt@garloff.de" date="1576843200">- Whitespace cleanup.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1581422400">- Fix spelling of license name
  * from: CC-BY-SA 3.0
  * to:   CC-BY-SA-3.0
  as right syntax is checked by SLES15_SP1 now
  see: https://spdx.org/licenses/</changelog>
  <changelog author="&lt;roman.schiller@t-systems.com&gt;" date="1590148800">- Fix python2 or python3 shebang and execution for rhel releases.
- Remove python as build dependency because it is not needed there.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1618488000">- Add BMS support for OTC Ubuntu 20.04.
  * disable cloud-init network configuration for dataSource openTelekomCloud
    by using apply_network_config: false (only for BMS)</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1618920000">- Add BMS support for OTC Ubuntu 20.04.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="4da2fe23ed449b6ca50795d7d640535407af5f4e91e7f8b386013a8d8b63c8d1" name="bms-network-setup" arch="src">
  <version epoch="0" ver="1.11" rel="27.1"/>
  <changelog author="kurt@garloff.de" date="1534852800">- Change ordering of patch application to avoid conflict on RHEL7.</changelog>
  <changelog author="kurt@garloff.de" date="1534939200">- Fix in face of hotplugged NICs:
  * Wait for hotplugging to be completed.
  * Ifdown interfaces again that get enslaved.</changelog>
  <changelog author="kurt@garloff.de" date="1534939201">- Temporarily disable ifdowning interfaces.</changelog>
  <changelog author="kurt@garloff.de" date="1535025600">- Also disable hotplugging wait again, solve it in the hotplugging
  package instead.</changelog>
  <changelog author="kurt@garloff.de" date="1536753600">- Fix inconsistent indentation.</changelog>
  <changelog author="kurt@garloff.de" date="1536753601">- Fix SuSE detection for SLES15. (No /etc/SuSE-release!)</changelog>
  <changelog author="kurt@garloff.de" date="1539172800">- bms-setup-retry-findmac.diff: Retry when searching for NIC with
  our MAC address.</changelog>
  <changelog author="kurt@garloff.de" date="1539345600">- bms-network-setup-1.3:
  * Fix detection of perm_hwaddr for bond slaves on old kernels.
  * Fix parsing option -d.
  * New option -c to remove ifcfg-e* files for non-existing NICs.
    Use it on EulerOS.</changelog>
  <changelog author="kurt@garloff.de" date="1540296000">- bms-netplan-notab.diff: Remove erroneously introduced tabs from
  netplan yaml config again. (Sabrina).</changelog>
  <changelog author="kurt@garloff.de" date="1542369600">- bms-network-setup-1.4:
  * Fix syntax for transmit-hash-policy (from Sabrina Mueller).</changelog>
  <changelog author="kurt@garloff.de" date="1542974400">- Tune local disk for larger readahead (512-&gt;1280kB) on BMS.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1574769600">- Set network bond in netplanc configuration to 'active-backup'
  when getting mode: 1 from network_data.json
  netplan does not understand mode: 1 amymore in Ubuntu 18.04</changelog>
  <changelog author="kurt@garloff.de" date="1576843200">- Whitespace cleanup.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1581422400">- Fix spelling of license name
  * from: CC-BY-SA 3.0
  * to:   CC-BY-SA-3.0
  as right syntax is checked by SLES15_SP1 now
  see: https://spdx.org/licenses/</changelog>
  <changelog author="&lt;roman.schiller@t-systems.com&gt;" date="1590148800">- Fix python2 or python3 shebang and execution for rhel releases.
- Remove python as build dependency because it is not needed there.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1618488000">- Add BMS support for OTC Ubuntu 20.04.
  * disable cloud-init network configuration for dataSource openTelekomCloud
    by using apply_network_config: false (only for BMS)</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1618920000">- Add BMS support for OTC Ubuntu 20.04.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="ff870362228861e33abb1730e8cf688281a2e9bfe9a7accc1272ebf3f9039058" name="cloud-multiroute" arch="noarch">
  <version epoch="0" ver="0.8" rel="11.138"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="9f8f3536b910a946106ac9b0d9bff685408986c789f4a3e2732c11078177f682" name="cloud-multiroute" arch="src">
  <version epoch="0" ver="0.8" rel="11.138"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="2177dd6f0f81b2339ed256f1775a31f44adb829714db1cf93fd798a45ddd80a7" name="cloud-otc-keyring" arch="noarch">
  <version epoch="0" ver="2025.1.0" rel="1.1"/>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1596110400">- clean up old keys</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1596715200">- removed rpm GPG key removal due to rpm transaction lock file issue</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1597147200">- extension of GPG key</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1599480000">- added removal of old gpg key 3EA8504132B7F1E954A9C0ADA4F6B29805A6C49C</changelog>
  <changelog author="Roman Schiller &lt;roman.schiller@t-systems.com&gt;" date="1666267200">- extension of GPG key</changelog>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="be97426b43413499af0fad3f85d635e71d7df390b31fef22167ae7631cfda07d" name="cloud-otc-keyring" arch="src">
  <version epoch="0" ver="2025.1.0" rel="1.1"/>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1596110400">- clean up old keys</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1596715200">- removed rpm GPG key removal due to rpm transaction lock file issue</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1597147200">- extension of GPG key</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1599480000">- added removal of old gpg key 3EA8504132B7F1E954A9C0ADA4F6B29805A6C49C</changelog>
  <changelog author="Roman Schiller &lt;roman.schiller@t-systems.com&gt;" date="1666267200">- extension of GPG key</changelog>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="c1790fa8885ee4cd394b1de10a7b8d2367698607bd0adf1f258d25c34f1ef9a0" name="jq" arch="src">
  <version epoch="0" ver="1.6" rel="4.15.117"/>
  <changelog author="robert.munteanu@gmail.com" date="1380628800">- Initial packaging of version 1.3</changelog>
  <changelog author="cdenicolo@suse.com" date="1382011200">- license update: MIT and CC-BY-3.0
  documentation is licensed under CC-BY-3.0</changelog>
  <changelog author="prusnak@opensuse.org" date="1402833600">- Updated to 1.4
  + New command line arguments
  * jq --arg-file variable file
  * jq --unbuffered
  * jq -e / --exit-status (set exit status based on outputs)
  * jq -S / --sort-keys (now jq no longer sorts object keys by
    default
  + Syntax changes
  * .. -&gt; like // in XPath (recursive traversal)
  * question mark (e.g., .a?) to suppress errors
  * ."foo" syntax (equivalent to .["foo"])
  * better error handling for .foo
  * added % operator (modulo)
  * allow negation without requiring extra parenthesis
  * more function arguments (up to six)
  + New filters
  * any, all
  * iterables, arrays, objects, scalars, nulls, booleans,
    numbers, strings, values
  + New string built-ins
  * split
  * join (join an array of strings with a given separator string)
  * ltrimstr, rtrimstr
  * startswith, endswith
  * explode, implode
  * fromjson, tojson
  * index, rindex, indices
  + New math functions
  * floor, sqrt, cbrt, etc.
  + Addition of libjq, a C API interface to jq's JSON representation
    and for running jq programs from C applications.</changelog>
  <changelog author="idonmez@suse.com" date="1403870400">- Don't package static libs
- Fix rpath on the main binary</changelog>
  <changelog author="idonmez@suse.com" date="1439899200">- Update to version 1.5
  * Regexp support
  * A proper module system
  * Destructuring syntax
  * Math functions
  * An online streaming parser
  * Minimal I/O builtins (inputs, debug)
  * try/catch for catching and handling errors
  * Tail call optimization
  * Datetime functions
  * Performance enhancements
- Add oniguruma-devel BuildRequires for regexp support</changelog>
  <changelog author="idonmez@suse.com" date="1461585600">- Add CVE-2015-8863.patch to fix a heap overflow bsc#976992</changelog>
  <changelog author="mpluskal@suse.com" date="1468670400">- Make building more verbose
- Run tests</changelog>
  <changelog author="mpluskal@suse.com" date="1483358400">- Update tests dependencies to increase test coverage (bsc#1017157)
  * valgrind based tests were skipped
- Do not run tests in qemu builds, valgrind does not work reliably
  in such conditions</changelog>
  <changelog author="idonmez@suse.com" date="1486123200">- Add CVE-2016-4074.patch to prevent a stack exhaustion
  CVE-2016-4074 bsc#1014176</changelog>
  <changelog author="Avindra Goolcharan &lt;aavindraa@gmail.com&gt;" date="1541160000">- Update to version 1.6
  * Destructuring Alternation
  * many new builtins (see docs)
  * Add support for ASAN and UBSAN
  * Make it easier to use jq with shebangs
  * Add $ENV builtin variable to access environment
  * Add JQ_COLORS env var for configuring the output colors
  * change: Calling jq without a program argument now always assumes
    "." for the program, regardless of stdin/stdout
  * fix: Make sorting stable regardless of qsort.
- cleanup with spec-cleaner
- drop CVE-2015-8863.patch (upstreamed in 8eb1367ca44e772963e704a700ef72ae2e12babd)
- drop CVE-2016-4074.patch (upstreamed in fd4ae8304e23007672af9a37855c7a76de7c78cf)</changelog>
  <changelog author="myen@suse.com" date="1562241600">- Make jq depend on libjq1, so upgrading jq upgrades both
  See: https://github.com/stedolan/jq/issues/1904</changelog>
</package>
<package pkgid="15d47330093753a4c9a1460ef9f28eb5341297a83ff89cfd21226f2733e53ff4" name="jq" arch="x86_64">
  <version epoch="0" ver="1.6" rel="4.15.117"/>
  <changelog author="robert.munteanu@gmail.com" date="1380628800">- Initial packaging of version 1.3</changelog>
  <changelog author="cdenicolo@suse.com" date="1382011200">- license update: MIT and CC-BY-3.0
  documentation is licensed under CC-BY-3.0</changelog>
  <changelog author="prusnak@opensuse.org" date="1402833600">- Updated to 1.4
  + New command line arguments
  * jq --arg-file variable file
  * jq --unbuffered
  * jq -e / --exit-status (set exit status based on outputs)
  * jq -S / --sort-keys (now jq no longer sorts object keys by
    default
  + Syntax changes
  * .. -&gt; like // in XPath (recursive traversal)
  * question mark (e.g., .a?) to suppress errors
  * ."foo" syntax (equivalent to .["foo"])
  * better error handling for .foo
  * added % operator (modulo)
  * allow negation without requiring extra parenthesis
  * more function arguments (up to six)
  + New filters
  * any, all
  * iterables, arrays, objects, scalars, nulls, booleans,
    numbers, strings, values
  + New string built-ins
  * split
  * join (join an array of strings with a given separator string)
  * ltrimstr, rtrimstr
  * startswith, endswith
  * explode, implode
  * fromjson, tojson
  * index, rindex, indices
  + New math functions
  * floor, sqrt, cbrt, etc.
  + Addition of libjq, a C API interface to jq's JSON representation
    and for running jq programs from C applications.</changelog>
  <changelog author="idonmez@suse.com" date="1403870400">- Don't package static libs
- Fix rpath on the main binary</changelog>
  <changelog author="idonmez@suse.com" date="1439899200">- Update to version 1.5
  * Regexp support
  * A proper module system
  * Destructuring syntax
  * Math functions
  * An online streaming parser
  * Minimal I/O builtins (inputs, debug)
  * try/catch for catching and handling errors
  * Tail call optimization
  * Datetime functions
  * Performance enhancements
- Add oniguruma-devel BuildRequires for regexp support</changelog>
  <changelog author="idonmez@suse.com" date="1461585600">- Add CVE-2015-8863.patch to fix a heap overflow bsc#976992</changelog>
  <changelog author="mpluskal@suse.com" date="1468670400">- Make building more verbose
- Run tests</changelog>
  <changelog author="mpluskal@suse.com" date="1483358400">- Update tests dependencies to increase test coverage (bsc#1017157)
  * valgrind based tests were skipped
- Do not run tests in qemu builds, valgrind does not work reliably
  in such conditions</changelog>
  <changelog author="idonmez@suse.com" date="1486123200">- Add CVE-2016-4074.patch to prevent a stack exhaustion
  CVE-2016-4074 bsc#1014176</changelog>
  <changelog author="Avindra Goolcharan &lt;aavindraa@gmail.com&gt;" date="1541160000">- Update to version 1.6
  * Destructuring Alternation
  * many new builtins (see docs)
  * Add support for ASAN and UBSAN
  * Make it easier to use jq with shebangs
  * Add $ENV builtin variable to access environment
  * Add JQ_COLORS env var for configuring the output colors
  * change: Calling jq without a program argument now always assumes
    "." for the program, regardless of stdin/stdout
  * fix: Make sorting stable regardless of qsort.
- cleanup with spec-cleaner
- drop CVE-2015-8863.patch (upstreamed in 8eb1367ca44e772963e704a700ef72ae2e12babd)
- drop CVE-2016-4074.patch (upstreamed in fd4ae8304e23007672af9a37855c7a76de7c78cf)</changelog>
  <changelog author="myen@suse.com" date="1562241600">- Make jq depend on libjq1, so upgrading jq upgrades both
  See: https://github.com/stedolan/jq/issues/1904</changelog>
</package>
<package pkgid="2e1f266e65e259fb851077314bf75c3702e3e32213812eafaceeabe0f251f49f" name="libjq-devel" arch="x86_64">
  <version epoch="0" ver="1.6" rel="4.15.117"/>
  <changelog author="robert.munteanu@gmail.com" date="1380628800">- Initial packaging of version 1.3</changelog>
  <changelog author="cdenicolo@suse.com" date="1382011200">- license update: MIT and CC-BY-3.0
  documentation is licensed under CC-BY-3.0</changelog>
  <changelog author="prusnak@opensuse.org" date="1402833600">- Updated to 1.4
  + New command line arguments
  * jq --arg-file variable file
  * jq --unbuffered
  * jq -e / --exit-status (set exit status based on outputs)
  * jq -S / --sort-keys (now jq no longer sorts object keys by
    default
  + Syntax changes
  * .. -&gt; like // in XPath (recursive traversal)
  * question mark (e.g., .a?) to suppress errors
  * ."foo" syntax (equivalent to .["foo"])
  * better error handling for .foo
  * added % operator (modulo)
  * allow negation without requiring extra parenthesis
  * more function arguments (up to six)
  + New filters
  * any, all
  * iterables, arrays, objects, scalars, nulls, booleans,
    numbers, strings, values
  + New string built-ins
  * split
  * join (join an array of strings with a given separator string)
  * ltrimstr, rtrimstr
  * startswith, endswith
  * explode, implode
  * fromjson, tojson
  * index, rindex, indices
  + New math functions
  * floor, sqrt, cbrt, etc.
  + Addition of libjq, a C API interface to jq's JSON representation
    and for running jq programs from C applications.</changelog>
  <changelog author="idonmez@suse.com" date="1403870400">- Don't package static libs
- Fix rpath on the main binary</changelog>
  <changelog author="idonmez@suse.com" date="1439899200">- Update to version 1.5
  * Regexp support
  * A proper module system
  * Destructuring syntax
  * Math functions
  * An online streaming parser
  * Minimal I/O builtins (inputs, debug)
  * try/catch for catching and handling errors
  * Tail call optimization
  * Datetime functions
  * Performance enhancements
- Add oniguruma-devel BuildRequires for regexp support</changelog>
  <changelog author="idonmez@suse.com" date="1461585600">- Add CVE-2015-8863.patch to fix a heap overflow bsc#976992</changelog>
  <changelog author="mpluskal@suse.com" date="1468670400">- Make building more verbose
- Run tests</changelog>
  <changelog author="mpluskal@suse.com" date="1483358400">- Update tests dependencies to increase test coverage (bsc#1017157)
  * valgrind based tests were skipped
- Do not run tests in qemu builds, valgrind does not work reliably
  in such conditions</changelog>
  <changelog author="idonmez@suse.com" date="1486123200">- Add CVE-2016-4074.patch to prevent a stack exhaustion
  CVE-2016-4074 bsc#1014176</changelog>
  <changelog author="Avindra Goolcharan &lt;aavindraa@gmail.com&gt;" date="1541160000">- Update to version 1.6
  * Destructuring Alternation
  * many new builtins (see docs)
  * Add support for ASAN and UBSAN
  * Make it easier to use jq with shebangs
  * Add $ENV builtin variable to access environment
  * Add JQ_COLORS env var for configuring the output colors
  * change: Calling jq without a program argument now always assumes
    "." for the program, regardless of stdin/stdout
  * fix: Make sorting stable regardless of qsort.
- cleanup with spec-cleaner
- drop CVE-2015-8863.patch (upstreamed in 8eb1367ca44e772963e704a700ef72ae2e12babd)
- drop CVE-2016-4074.patch (upstreamed in fd4ae8304e23007672af9a37855c7a76de7c78cf)</changelog>
  <changelog author="myen@suse.com" date="1562241600">- Make jq depend on libjq1, so upgrading jq upgrades both
  See: https://github.com/stedolan/jq/issues/1904</changelog>
</package>
<package pkgid="0a052b8cb3c5550f132b202fe1149ca9b511762e5da63228104585ed6a427699" name="libjq1" arch="x86_64">
  <version epoch="0" ver="1.6" rel="4.15.117"/>
  <changelog author="robert.munteanu@gmail.com" date="1380628800">- Initial packaging of version 1.3</changelog>
  <changelog author="cdenicolo@suse.com" date="1382011200">- license update: MIT and CC-BY-3.0
  documentation is licensed under CC-BY-3.0</changelog>
  <changelog author="prusnak@opensuse.org" date="1402833600">- Updated to 1.4
  + New command line arguments
  * jq --arg-file variable file
  * jq --unbuffered
  * jq -e / --exit-status (set exit status based on outputs)
  * jq -S / --sort-keys (now jq no longer sorts object keys by
    default
  + Syntax changes
  * .. -&gt; like // in XPath (recursive traversal)
  * question mark (e.g., .a?) to suppress errors
  * ."foo" syntax (equivalent to .["foo"])
  * better error handling for .foo
  * added % operator (modulo)
  * allow negation without requiring extra parenthesis
  * more function arguments (up to six)
  + New filters
  * any, all
  * iterables, arrays, objects, scalars, nulls, booleans,
    numbers, strings, values
  + New string built-ins
  * split
  * join (join an array of strings with a given separator string)
  * ltrimstr, rtrimstr
  * startswith, endswith
  * explode, implode
  * fromjson, tojson
  * index, rindex, indices
  + New math functions
  * floor, sqrt, cbrt, etc.
  + Addition of libjq, a C API interface to jq's JSON representation
    and for running jq programs from C applications.</changelog>
  <changelog author="idonmez@suse.com" date="1403870400">- Don't package static libs
- Fix rpath on the main binary</changelog>
  <changelog author="idonmez@suse.com" date="1439899200">- Update to version 1.5
  * Regexp support
  * A proper module system
  * Destructuring syntax
  * Math functions
  * An online streaming parser
  * Minimal I/O builtins (inputs, debug)
  * try/catch for catching and handling errors
  * Tail call optimization
  * Datetime functions
  * Performance enhancements
- Add oniguruma-devel BuildRequires for regexp support</changelog>
  <changelog author="idonmez@suse.com" date="1461585600">- Add CVE-2015-8863.patch to fix a heap overflow bsc#976992</changelog>
  <changelog author="mpluskal@suse.com" date="1468670400">- Make building more verbose
- Run tests</changelog>
  <changelog author="mpluskal@suse.com" date="1483358400">- Update tests dependencies to increase test coverage (bsc#1017157)
  * valgrind based tests were skipped
- Do not run tests in qemu builds, valgrind does not work reliably
  in such conditions</changelog>
  <changelog author="idonmez@suse.com" date="1486123200">- Add CVE-2016-4074.patch to prevent a stack exhaustion
  CVE-2016-4074 bsc#1014176</changelog>
  <changelog author="Avindra Goolcharan &lt;aavindraa@gmail.com&gt;" date="1541160000">- Update to version 1.6
  * Destructuring Alternation
  * many new builtins (see docs)
  * Add support for ASAN and UBSAN
  * Make it easier to use jq with shebangs
  * Add $ENV builtin variable to access environment
  * Add JQ_COLORS env var for configuring the output colors
  * change: Calling jq without a program argument now always assumes
    "." for the program, regardless of stdin/stdout
  * fix: Make sorting stable regardless of qsort.
- cleanup with spec-cleaner
- drop CVE-2015-8863.patch (upstreamed in 8eb1367ca44e772963e704a700ef72ae2e12babd)
- drop CVE-2016-4074.patch (upstreamed in fd4ae8304e23007672af9a37855c7a76de7c78cf)</changelog>
  <changelog author="myen@suse.com" date="1562241600">- Make jq depend on libjq1, so upgrading jq upgrades both
  See: https://github.com/stedolan/jq/issues/1904</changelog>
</package>
<package pkgid="ecfe4fa9a5c493d4e161fee01c3bdfb883d0ca9fb1f82df86f8c5bcaeb57fd30" name="libs3-4" arch="x86_64">
  <version epoch="0" ver="4.1" rel="21.81"/>
  <changelog author="kurt@garloff.de" date="1454068800">- libs3-progress.diff: better progress reporting on upload (put)</changelog>
  <changelog author="kurt@garloff.de" date="1454587200">- Include patch from Mattias Ellert &lt;mattias.ellert@fysast.uu.se&gt;:
  * Fix formatting on 32bit.</changelog>
  <changelog author="kurt@garloff.de" date="1478001600">- Max 200 updates on upload.</changelog>
  <changelog author="kurt@garloff.de" date="1493899200">- Update to github.com/bji.</changelog>
  <changelog author="kurt@garloff.de" date="1493985600">- Increase size of parts from 15 to 128MB. Display total number.</changelog>
  <changelog author="kurt@garloff.de" date="1528286400">- Fix format-truncation errors by gcc-7 compiler ...</changelog>
  <changelog author="kurt@garloff.de" date="1593950400">- fix-duplicate-case.diff: CURLE_PEER_FAILE_VERIFICATION and
  CURLE_SSL_CACERT may be identical leading to compile errors.</changelog>
  <changelog author="kurt@garloff.de" date="1594036800">- fix-snprintf-overflow.diff: Apply on all modern distros.</changelog>
  <changelog author="kurt@garloff.de" date="1594036801">- fix-strops-lencheck.diff: fix len checking stringops that make
  no sense (which the compiler duefully spotted).</changelog>
</package>
<package pkgid="e0511d091222bfa4b7995601286614dcb9d3f236fd0c77abc4bcbe3089cb11fb" name="libs3" arch="src">
  <version epoch="0" ver="4.1" rel="21.81"/>
  <changelog author="kurt@garloff.de" date="1454068800">- libs3-progress.diff: better progress reporting on upload (put)</changelog>
  <changelog author="kurt@garloff.de" date="1454587200">- Include patch from Mattias Ellert &lt;mattias.ellert@fysast.uu.se&gt;:
  * Fix formatting on 32bit.</changelog>
  <changelog author="kurt@garloff.de" date="1478001600">- Max 200 updates on upload.</changelog>
  <changelog author="kurt@garloff.de" date="1493899200">- Update to github.com/bji.</changelog>
  <changelog author="kurt@garloff.de" date="1493985600">- Increase size of parts from 15 to 128MB. Display total number.</changelog>
  <changelog author="kurt@garloff.de" date="1528286400">- Fix format-truncation errors by gcc-7 compiler ...</changelog>
  <changelog author="kurt@garloff.de" date="1593950400">- fix-duplicate-case.diff: CURLE_PEER_FAILE_VERIFICATION and
  CURLE_SSL_CACERT may be identical leading to compile errors.</changelog>
  <changelog author="kurt@garloff.de" date="1594036800">- fix-snprintf-overflow.diff: Apply on all modern distros.</changelog>
  <changelog author="kurt@garloff.de" date="1594036801">- fix-strops-lencheck.diff: fix len checking stringops that make
  no sense (which the compiler duefully spotted).</changelog>
</package>
<package pkgid="246bb6b0f21903487304ae233c4757bb72c72f90c7ff016a3164529a7971f126" name="libs3-devel" arch="x86_64">
  <version epoch="0" ver="4.1" rel="21.81"/>
  <changelog author="kurt@garloff.de" date="1454068800">- libs3-progress.diff: better progress reporting on upload (put)</changelog>
  <changelog author="kurt@garloff.de" date="1454587200">- Include patch from Mattias Ellert &lt;mattias.ellert@fysast.uu.se&gt;:
  * Fix formatting on 32bit.</changelog>
  <changelog author="kurt@garloff.de" date="1478001600">- Max 200 updates on upload.</changelog>
  <changelog author="kurt@garloff.de" date="1493899200">- Update to github.com/bji.</changelog>
  <changelog author="kurt@garloff.de" date="1493985600">- Increase size of parts from 15 to 128MB. Display total number.</changelog>
  <changelog author="kurt@garloff.de" date="1528286400">- Fix format-truncation errors by gcc-7 compiler ...</changelog>
  <changelog author="kurt@garloff.de" date="1593950400">- fix-duplicate-case.diff: CURLE_PEER_FAILE_VERIFICATION and
  CURLE_SSL_CACERT may be identical leading to compile errors.</changelog>
  <changelog author="kurt@garloff.de" date="1594036800">- fix-snprintf-overflow.diff: Apply on all modern distros.</changelog>
  <changelog author="kurt@garloff.de" date="1594036801">- fix-strops-lencheck.diff: fix len checking stringops that make
  no sense (which the compiler duefully spotted).</changelog>
</package>
<package pkgid="7a30c6daa735e883e48dd339b21a1bac897a02a45614b1db7fb17f5de75e0f7c" name="network-hotplug" arch="noarch">
  <version epoch="0" ver="0.4" rel="2.1"/>
  <changelog author="kurt@garloff.de" date="1534939200">- Need full path (/sbin) when calling dhclient
- Call ifup rather than dhclient
- Add TYPE=Ethernet, change STARTMODE=auto (for SUSE only)
- Don't delete config file afterwards
- Only sleep 1s before bringing up interface</changelog>
  <changelog author="kurt@garloff.de" date="1534939201">- Update to network-hotplug-0.2: Support SUSE.</changelog>
  <changelog author="kurt@garloff.de" date="1534939202">- SUSE build fixes (require udev), change to STARTMODE=hotplug.</changelog>
  <changelog author="kurt@garloff.de" date="1535025600">- Only generate config if non is preexisting.
- Issue ifup only if config file indicated dhcp BOOTPROTO.
- Issue ifdown only if we generated the config file.</changelog>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="605bcfa0c4ad7e89462efab53e64927f08d5c8cba9ef4dca3f1e3cc8c2023556" name="network-hotplug" arch="src">
  <version epoch="0" ver="0.4" rel="2.1"/>
  <changelog author="kurt@garloff.de" date="1534939200">- Need full path (/sbin) when calling dhclient
- Call ifup rather than dhclient
- Add TYPE=Ethernet, change STARTMODE=auto (for SUSE only)
- Don't delete config file afterwards
- Only sleep 1s before bringing up interface</changelog>
  <changelog author="kurt@garloff.de" date="1534939201">- Update to network-hotplug-0.2: Support SUSE.</changelog>
  <changelog author="kurt@garloff.de" date="1534939202">- SUSE build fixes (require udev), change to STARTMODE=hotplug.</changelog>
  <changelog author="kurt@garloff.de" date="1535025600">- Only generate config if non is preexisting.
- Issue ifup only if config file indicated dhcp BOOTPROTO.
- Issue ifdown only if we generated the config file.</changelog>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="721f7f6be78d559d11fe239fb50988942494e1b3d5ee72041304b2504b3faf3e" name="otc-tools" arch="noarch">
  <version epoch="0" ver="0.8.34" rel="11.1"/>
  <changelog author="kurt@garloff.de" date="1524139200">- Update to otc-tools-0.8.21:
  * Support otc.sh help XXX as alias for otc.sh XXX help.
  * Support multiple certficates in ELB listener (for SNI).
  * Support specifying --domain for ELB certificates (SNI).
  * Support referencing ELB resources by name.
  * Document token cache and cmd line parser in README.</changelog>
  <changelog author="kurt@garloff.de" date="1525176000">- Update to otc-tools-0.8.22:
  * New function ecs create2 that uses v2 (nova) API, incomplete.
  * Is needed for physical flavors (Bare Metal) .
  * Avoid accidentially setting flavor in ECSupdate.
  * Resolve volume names in backuppol create and backup.
  * Understand some alternative options to improve nova compat.</changelog>
  <changelog author="kurt@garloff.de" date="1525348800">- Update to otc-tools-0.8.23:
  * More work ecs create2: File injections, EIP allocation,
    flexible block device mapping, tag inheritance to volumes.
  * Allow passing custom scheduler-hints (JSON).
  * ssh_otc.sh: add --wait option</changelog>
  <changelog author="kurt@garloff.de" date="1525521600">- Update to otc-tools-0.8.24:
  * Fix schedulder-hints passing for ecs create2.
  * Support ecs console-log.
  * Support for updating bandwidth of EIPs (eip update).
  * Allow referencing EIPs by IP address.</changelog>
  <changelog author="kurt@garloff.de" date="1527681600">- Update to otc-tools-0.8.25:
  * Fix parsing of VM name as positional param (broke in 0.8.23).
  * Support boot from volume (automatically switches to create2).
  * Support internal ELBs without AZ specification.
  * Fix typo in determination whether we need explicit block
    device mapping (we could have missed disk size specification).</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Udpate to otc-tools-0.8.26:
  * Automatical switch to vm create2 now really active.
  * Prefer exact DNS name matches in domain commands and error
    out if no match is found.
  * New vm flavor-pretty (flp) function resulting in a nicer to
    read flavor list (from Sebastian Posner).</changelog>
  <changelog author="kurt@garloff.de" date="1535112000">- Update to otc-tools-0.8.27:
  * Don't consider non-existence of autorecovery as error.
  * Support --wait for vm start/stop/reboot (Rene Gilles).
  * Allow --instance-id in image create to be a VM name.
  * Support --type override for image create.
- Avoid confusing ssh with neutron port in ssh_otc.sh.</changelog>
  <changelog author="kurt@garloff.de" date="1537963200">- Update to otc-tools-0.8.28:
  * Use OS_TENANT_NAME if set and OS_PROJECT_NAME is not.
  * --paginate arrayname option for custom GET command.</changelog>
  <changelog author="kurt@garloff.de" date="1538049600">- Update to otc-tools-0.8.29:
  * Fix volume create --scsi (parser failed).</changelog>
  <changelog author="kurt@garloff.de" date="1541592000">- Update to otc-tools-0.8.30:
  * Work around tagging inconsistency in API (neutron, from Matt
    Rechenburg).
  * Implement otc.sh vpcpeer functions.
  * Clearer wording that otc-tools is deprecated (in favor of
    python-openstackclient plus python-otcextensions).</changelog>
  <changelog author="kurt@garloff.de" date="1541592001">- Update to otc-tools-0.8.31:
  * Prepare for publicip6 handling (untested, as not yet available
    in OTC PreProduction environment).
  * Support publicip bind with fixed IP specification (rather than
    port).
  * More verbose error messages.</changelog>
  <changelog author="kurt@garloff.de" date="1541764800">- Update to otc-tools-0.8.32:
  * Update license to CC-BY-SA-4.0 (was 3.0).
  * Add vm show2 using nova 2.26 API.
  * Use floatingip --pep for special IPs (was --ipv6, misleading).
  * Make ssh/scp_otc.sh chose the best of multiple IPs.</changelog>
  <changelog author="kurt@garloff.de" date="1549368000">- Update to otc-tools-0.8.33:
  * Document --autorecovery avail on KVM.
  * Tolerate lowercase x-subject-token on authentication call.
  * Handle tokens/secrets not starting with MII correctly.
  * Fix --unscoped token retrieval and improve indentation.</changelog>
  <changelog author="kurt@garloff.de" date="1549454400">- otc-tools-0833-public-ep.diff: Only consider public endpoints.</changelog>
  <changelog author="kurt@garloff.de" date="1549800000">- otc-tools-0833-tokendebugout.diff: Use sha1sum and {SHA1} prefix.
  Fix a case where X-Auth-Token would have ended up with the real
  token in the output produced with --debug.</changelog>
  <changelog author="roman.schiller@t-systems.com" date="1561204800">- otc-tools-0833-nova-api-version.diff: Ensure we use v1 endpoints
  for old Huawei cloudservers API.</changelog>
  <changelog author="kurt@garloff.de" date="1573387200">- otc-tools-0833-osauth3-prjws.diff: Make sure project domain
  is passed correctly in v3 auth call. Honor OS_AUTH_VERSION.
  Also tolerate white space in project names (CityCloud) and
  avoid warnings from jq for empty fields.</changelog>
  <changelog author="kurt@garloff.de" date="1573473600">- Update to otc-tools-0.8.34:
  * Strip \r (^M) from http responses.
  * Support for multi-region endpoint lists from keystone v3.</changelog>
  <changelog author="kurt@garloff.de" date="1573646400">- otc-tools-0834-multiregion.diff:
  Store region in token cache file name to avoid conflicts.</changelog>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="b3d1f581db8caca352c7c78fdf8407aed14e36e53c8a957da7eefa92b1fb2553" name="otc-tools" arch="src">
  <version epoch="0" ver="0.8.34" rel="11.1"/>
  <changelog author="kurt@garloff.de" date="1524139200">- Update to otc-tools-0.8.21:
  * Support otc.sh help XXX as alias for otc.sh XXX help.
  * Support multiple certficates in ELB listener (for SNI).
  * Support specifying --domain for ELB certificates (SNI).
  * Support referencing ELB resources by name.
  * Document token cache and cmd line parser in README.</changelog>
  <changelog author="kurt@garloff.de" date="1525176000">- Update to otc-tools-0.8.22:
  * New function ecs create2 that uses v2 (nova) API, incomplete.
  * Is needed for physical flavors (Bare Metal) .
  * Avoid accidentially setting flavor in ECSupdate.
  * Resolve volume names in backuppol create and backup.
  * Understand some alternative options to improve nova compat.</changelog>
  <changelog author="kurt@garloff.de" date="1525348800">- Update to otc-tools-0.8.23:
  * More work ecs create2: File injections, EIP allocation,
    flexible block device mapping, tag inheritance to volumes.
  * Allow passing custom scheduler-hints (JSON).
  * ssh_otc.sh: add --wait option</changelog>
  <changelog author="kurt@garloff.de" date="1525521600">- Update to otc-tools-0.8.24:
  * Fix schedulder-hints passing for ecs create2.
  * Support ecs console-log.
  * Support for updating bandwidth of EIPs (eip update).
  * Allow referencing EIPs by IP address.</changelog>
  <changelog author="kurt@garloff.de" date="1527681600">- Update to otc-tools-0.8.25:
  * Fix parsing of VM name as positional param (broke in 0.8.23).
  * Support boot from volume (automatically switches to create2).
  * Support internal ELBs without AZ specification.
  * Fix typo in determination whether we need explicit block
    device mapping (we could have missed disk size specification).</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Udpate to otc-tools-0.8.26:
  * Automatical switch to vm create2 now really active.
  * Prefer exact DNS name matches in domain commands and error
    out if no match is found.
  * New vm flavor-pretty (flp) function resulting in a nicer to
    read flavor list (from Sebastian Posner).</changelog>
  <changelog author="kurt@garloff.de" date="1535112000">- Update to otc-tools-0.8.27:
  * Don't consider non-existence of autorecovery as error.
  * Support --wait for vm start/stop/reboot (Rene Gilles).
  * Allow --instance-id in image create to be a VM name.
  * Support --type override for image create.
- Avoid confusing ssh with neutron port in ssh_otc.sh.</changelog>
  <changelog author="kurt@garloff.de" date="1537963200">- Update to otc-tools-0.8.28:
  * Use OS_TENANT_NAME if set and OS_PROJECT_NAME is not.
  * --paginate arrayname option for custom GET command.</changelog>
  <changelog author="kurt@garloff.de" date="1538049600">- Update to otc-tools-0.8.29:
  * Fix volume create --scsi (parser failed).</changelog>
  <changelog author="kurt@garloff.de" date="1541592000">- Update to otc-tools-0.8.30:
  * Work around tagging inconsistency in API (neutron, from Matt
    Rechenburg).
  * Implement otc.sh vpcpeer functions.
  * Clearer wording that otc-tools is deprecated (in favor of
    python-openstackclient plus python-otcextensions).</changelog>
  <changelog author="kurt@garloff.de" date="1541592001">- Update to otc-tools-0.8.31:
  * Prepare for publicip6 handling (untested, as not yet available
    in OTC PreProduction environment).
  * Support publicip bind with fixed IP specification (rather than
    port).
  * More verbose error messages.</changelog>
  <changelog author="kurt@garloff.de" date="1541764800">- Update to otc-tools-0.8.32:
  * Update license to CC-BY-SA-4.0 (was 3.0).
  * Add vm show2 using nova 2.26 API.
  * Use floatingip --pep for special IPs (was --ipv6, misleading).
  * Make ssh/scp_otc.sh chose the best of multiple IPs.</changelog>
  <changelog author="kurt@garloff.de" date="1549368000">- Update to otc-tools-0.8.33:
  * Document --autorecovery avail on KVM.
  * Tolerate lowercase x-subject-token on authentication call.
  * Handle tokens/secrets not starting with MII correctly.
  * Fix --unscoped token retrieval and improve indentation.</changelog>
  <changelog author="kurt@garloff.de" date="1549454400">- otc-tools-0833-public-ep.diff: Only consider public endpoints.</changelog>
  <changelog author="kurt@garloff.de" date="1549800000">- otc-tools-0833-tokendebugout.diff: Use sha1sum and {SHA1} prefix.
  Fix a case where X-Auth-Token would have ended up with the real
  token in the output produced with --debug.</changelog>
  <changelog author="roman.schiller@t-systems.com" date="1561204800">- otc-tools-0833-nova-api-version.diff: Ensure we use v1 endpoints
  for old Huawei cloudservers API.</changelog>
  <changelog author="kurt@garloff.de" date="1573387200">- otc-tools-0833-osauth3-prjws.diff: Make sure project domain
  is passed correctly in v3 auth call. Honor OS_AUTH_VERSION.
  Also tolerate white space in project names (CityCloud) and
  avoid warnings from jq for empty fields.</changelog>
  <changelog author="kurt@garloff.de" date="1573473600">- Update to otc-tools-0.8.34:
  * Strip \r (^M) from http responses.
  * Support for multi-region endpoint lists from keystone v3.</changelog>
  <changelog author="kurt@garloff.de" date="1573646400">- otc-tools-0834-multiregion.diff:
  Store region in token cache file name to avoid conflicts.</changelog>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
</otherdata>